This single or three-phase, panel mount power meter is ideal for installation on main or sub-distribution boards where readings need to be accessed without opening the panel.
Type
3 phase multi-function power meter
Mounting
Panel Mount
Measured Voltage and Frequency
100V to 500V, 50/60Hz
Output
Modbus RS485
Measurements
Voltage, amps, frequency, kilowatts, kilowatt hours, power factor, real power, reactive power, apparent power and harmonics
Accuracy
±2%
Display
3.5 Inch TFT screen display
Rogowski Coils options
Comes with 3 rogowski coils
Options: 500 amps, 1,000 amps or 3,000 amps
Power requirement
85 to 265 V AC/DC, 3.5W
Application
Manufacturing and industrial use
Temporary or permanent installation
Mains supply and sub metering individual equipment or sub loads
This single or three-phase, panel mount power meter is ideal for installation on main or sub-distribution boards where readings need to be accessed without opening the panel. The Modbus RTU output can be connected to your data acquisition system for easy access to data remotely.
Monitoring power consumption will give you a clear indication of the energy and cost of running your compressed air system. This power meter measures Voltage, Amps, Frequency, Kilowatts, Power factor, Real Power, Reactive Power, Apparent Power, Kilowatt hours and harmonics. It can be installed on mains supply or used for sub metering individual equipment or sub loads.
Installing a panel mount power meter is not difficult but should be done by suitably qualified and experienced technicians. Some knowledge of MODBUS communications is required to connect the power meters to your network
The unit comes with 3 rogowski coils current transducers. Rogowski coils have a large flexible coil and are an excellent solution where a traditional current clamp is too difficult to fit. The coil is shielded against the influence of external magnetic fields and is suitable for high power load analysis. Coils can be fastened by cable ties for permanent installs.
Best suited to
- 3 phase or single phase measurements
- Permanent installations
- Panel mounting
Key features of the Panel Mount Power Meter
- Multi-function meter with display
- Measure single or three phase power with the same meter
- Panel mount
- Modbus/RTU output
- Easy to install rogowski coil current transducers
- Measure: Voltage, Amps, Frequency, Kilowatts, Power factor, Real Power, Reactive Power, Apparent Power, Kilowatt hours and Harmonics
- 3 rogowski coil current rating options
- Can be installed on mains supply
- Can be used for sub metering individual equipment or sub load
- 12 month warranty
Options for the Panel Mount Power Meter
- Rogowski Coil current rating – 500 amps, 1,000 amps or 3,000 amps
Contact us for other Rogowski Coil sizes.
Warranty
12 month warranty
Other Information
Part Numbers: POM300100, POM300200, POM300300
| Weight | N/A |
|---|---|
| Dimensions | N/A |
Specifications
General
Type |
Multi-function power meter suitable for power analysis, energy metering and tariff meter |
Mounting |
Panel Mount |
Poles Description |
|
Display |
3.5 Inch TFT screen display |
Accuracy |
±2%
Note: the accuracy of the sensor is affected by installation location and on-site conditions. |
Measured Voltage and Frequency |
|
Sampling Rate |
8,000 samples per second |
Harmonic |
52th Max |
Outputs
Output |
Digital: RS485 Modbus / RTU |
Output Signals |
|
Inputs
Input Type |
|
Primary current range |
Adjustable from 0.1A to 9999A |
Measurement Input range |
1/2 ^25mV to 333mV |
Permissible overload |
600mV for 10s/hours |
Power Supply
Power Supply |
|
Electrical Connection |
Terminal strip |
Other Information
Alarm |
|
Dimensions |
|
Ambient Temperature Rang |
|
IP Rating |
IP20 |
Installation Type |
Permanent installation, or Temporary installation |
Warranty Period |
12 months |
